The aim of the experiments is to measure the resistance of commonly used materials like aluminium, copper, and nichrome at both room temperature and cryogenic temperature (77K). To achieve this, an experimental setup ...

Natural fibres have been outstanding materials which are feasible and amble substitute for expensive, non-bio degradable and non-renewable synthetic materials so these organic/natural fibres can be used as replacement ...

The potential performance enhancement of a residential split air conditioning system with a microchannel heat exchanger is investigated numerically and verified experimentally. Replacement of fin and tube condenser in ...

Green building designs are gaining traction in the current scenario, as today's energy source has a significant environmental impact due to its reliance on fossil fuels. Furthermore, fossil fuel sources are depleting ...

Cryocoolers are devices that produce very low temperatures and provide adequate amount of cooling power at a specific location and hence can replace the conventional cryogenic fluids. The main difference between cryocoolers ...

The main focus of the research was to investigate the process of machining Inconel 718 alloy using a Tungsten Carbide tool with a diameter of 6mm. Inconel 718 is a challenging material to machine due to its hardness ...

A synthetic jet generally consists of a cavity with a driver attached on one side and an orifice on the opposite side. When the driver moves back and forth, the jet will generate an unsteady flow through the orifice ...

The research focuses on the machining performance of a Titanium Aluminum Silicon Nitride (TiAlSiN) coated tungsten carbide tool during end milling of maraging steel C300. End milling experiments are performed at various ...

One of the largest environmental problems facing today is the fresh water scarcity in the world. On earth, 97% of total water is salt water and the remaining 3% is the freshwater. Desalination is the process by which ...