• Fabrication and Characterization of Aluminium Metal Matrix Composites reinforced with Clamshell 

  Muhammad, Malik F; Mubarak, Ali.M. (2024-05-22)

  Metal matrix composites (MMCs) have garnered significant attention due to their improved mechanical properties and versatility in various engineering applications. This study focuses on the fabrication and characterization ...
• Analysis of Springback in Incremental Forming 

  Ramvalsal, S; Sadiq, A (2024-05-22)

  Incremental forming process is having greater industrial relevance for developing minimum or batch number of pieces by forming metals to complex shapes even without using a die. The springback phenomenon is an inherent ...
• Design and Fabrication of a Flexible Robotic Gripper for Material Handling 

  Abhinand, C.S.; Mubarak, Ali.M. (2024-05-24)

  Robotic grippers are integral components in modern automation. Recent technological advances enable gripper-equipped robots to perform many task traditionally associated with the human hand, allowing the use of grippers ...
• DEVELOPMENT OF TWO STAGE GIFFORD McMAHON CRYOCOOLER 

  Rahul, R; Rijo Jacob, Thomas (2024-06-03)

  Cryocoolers are devices that produce very low temperatures and provide adequate amount of cooling power at a specific location and hence can replace the conventional cryogenic fluids. The main difference between cryocoolers ...
• CFD-Analysis Study of Drug Deposition In Tracheobronchial Airways of Asthmatic Persons From Different Age Groups 

  Praful, P; Kannan, S (2023-07)

  The people who already had respiratory conditions like asthma were the ones who suffered the most from COVID.The most frequent chronic illness in children, asthma, is the main factor in pediatric hospitalizations all ...
• NEURAL NETWORK-BASED PREDICTION OF MODIFIED CFRP COMPOSITES USED IN AEROSPACE APPLICATION 

  Mohammed, Sanal B; Kannan, S (2023-07-12)

  CFRPs, or carbon fiber reinforced polymers, are renowned for having superior wear characteristics. In this study, we compared the wear properties of polycar bonate (PC)/acrylonitrile butadiene styrene (ABS) modified ...
• PATIENT SPECIFIC DESIGN AND FEA BASED OPTIMIZATION OF ANKLE FOOT ORTHOSI 

  Milan, M; Kannan, S (2023-07-11)

  The digital workflow in orthotics and Prosthetics is the use of digital technology and tools to simplify and streamline the fabrication process of a prosthetics or an orthosis. There are a significant range of digital ...
• GAME-BASED HAND REHABILITATION TO IMPROVE MOBILITY FOR POST-STROKE PATIENTS 

  Athul, V; Kannan, S (2023-07-12)

  Stroke is a significant global health concern affecting millions of people each year. Stroke related disabilities can manifest in a variety of ways, and their impact on a person's life can be very different. Strokes can ...
• DISSIMILAR METAL WELDING OF INCONEL 718 WITH TI6AL4V: A SIMULATION-BASED APPROACH USING CATIA 

  Arun, K S; Kannan, S (2023-07-12)

  Dissimilar metal welding, particularly the joining of Inconel 718 and Ti-6Al-4V alloys, presents significant challenges due to their disparate properties. This study proposes a simulation-based approach for Tungsten ...
• EFFECT OF CRYOTREATMENT ON THE MICROSTRUCTURAL EVOLUTION OF Ti-Al-Ni-Cr-Co-Fe BASED HIGH ENTROPY ALLOY 

  Arjun, Santhosh; Kannan, S (2023-07-07)

  High Entropy Alloys (HEAs) are new class of materials. Recent Studies on HEAs have attracted much attention in the field of scientific research and industry. There has been a lot of interest in HEA compositions having ...
• DEVELOPMENT OF SMART DIABETIC FOOT WALKER – PROOF OF PRINCIPLE PHASE 

  Anverlal, A N (2023-07-12)

  Biomechanics studies usually limited to resource intensive laboratory with relevant technical expertise. The biomechanical assessments help to identify, understand and give treatments for disorders and diseases affecting ...
• Experimental Investigation and Optimization of PC/ABS Blend Composition in DGEBA Resin for Resin Infusion Moulding(RIM) 

  Anukrishna, G S; Kannan, S (2023-07)

  This research investigates the issue of brittleness in DGEBA resin, which limits its suitability for aerospace composite materials. The study explores the combined effects of polycarbonate (PC) and acrylonitrile butadiene ...
• EVALUATION OF MICROSTRUCTURE, MECHANICAL, AND CORROSIVE BEHAVIOUR OF ALUMINIUM METAL MATRIX COMPOSIT 

  Akhil, H; Kannan, S (2023-07-11)

  The aim of this research project is to examine the results of using stir casting to incorporate boron carbide (B4C) and coconut shell ash as reinforcements into an Al1350 alloy (aluminium wire) matrix. To improve its ...
• B4C AND GRANITE POWDER REINFORCEMENTS IN A HYBRID ALUMINIUM COMPOSITE: WEAR ANALYSIS 

  Abhi M, Anson; Kannan, S (2023-09-12)

  The incorporation of reinforcement materials in metal matrix composites (MMCs) has gained significant attention in recent years due to their potential to enhance mechanical and tribological properties. This literature ...
• EXPERIMENTAL INVESTIGATION ON THE PHYSICAL AND COMBUSTION PROPERTIES OF BRIQUETTES FROM VARIOUS AGRO -AQUATIC WASTES 

  Sonu, S; Shafi, K A (2022-09-16)

  The constant increase in environmental pollution and depletion of renewable resources leads to a focus on bio briquette. Therefore, several issues arise relating to reusing or recycling such materials. Many of the ...
• EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF UNTREATED AND CRYO-TREATED HEMP FIBER REINFORCED POLYMER COMPOSITES 

  Renju, C Daniel; Mubarak, Ali (2022-09-12)

  Emerging research is primarily concerned with environmental and economic challenges associated with the development of new materials for future industries. Various industry sectors have been attempting to replace ...
• MECHANICAL INVESTIGATION OF CRYO-TREATED SILANIZED GRAPHENE OXIDE MODIFIED CARBON FIBER REINFORCED POLYMER COMPOSITE 

  Rajalekshmi, S; Reby Roy, K E (2022-09-12)

  The Space industry is still in search for a suitable material for cryogenic tanks. Carbon Fiber Reinforced Plastic composites is identified as a compatible material for cryogenic applications. Various researches are ...
• PREDICTION OF STRESS GENERATED AT INSOLE SUB-SYSTEM OF DIABETIC FOOT ULCER OFFLOADING DEVICE USING FULL FACTORIAL DOE 

  Nameer, Najeeb; Kannan, S (2022-09-16)

  Diabetes is one of the metabolic diseses.Uncontrolled diabetes can lead to diabetic foot ulcers and if it is not treated further it would lead to amputation. Foot ulcer patients are prescribed with Diabetic Foot Ulcer ...
• EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF CUTTING PARAMETERS IN HARD TURNING OPERATION 

  Muhammed Bukhari, B N; Kannan, S (2022-09-12)

  The need for materials with extraordinary characteristics is one of the major challenges faced by the engineering sector. This project takes an alternative strategy since it addresses the economic impact on pure hard ...
• COMPARISON OF TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM BORON CARBIDE AND COCONUT SHELL ASH COMPOSITES 

  Midhun, A R; Rakesh Pillai, R (2022-09-12)

  Composite materials became the cornerstones in Material Science and Technology spanning the last two decades. Improved performance with the introduction of affordable manufacturing techniques made composite materials ...

View more