JavaScript is disabled for your browser. Some features of this site may not work without it.
2023
Browse by
Recent Submissions
-
(2023-05)A synthetic jet generally consists of a cavity with a driver attached on one side and an orifice on the opposite side. When the driver moves back and forth, the jet will generate an unsteady flow through the orifice ...
-
(2023-05)Natural fibres have been outstanding materials which are feasible and amble substitute for expensive, non-bio degradable and non-renewable synthetic materials so these organic/natural fibres can be used as replacement ...
-
(2023-05)The main focus of the research was to investigate the process of machining Inconel 718 alloy using a Tungsten Carbide tool with a diameter of 6mm. Inconel 718 is a challenging material to machine due to its hardness ...
-
(2023-05)INVESTIGATION ON THE CAPACITANCE FLOW METER AND DEVELOPMENT OF VOID FRACTION SENSOR FOR CRYOGENIC TWO-PHASE FLOW
-
(2023-05)The research focuses on the machining performance of a Titanium Aluminum Silicon Nitride (TiAlSiN) coated tungsten carbide tool during end milling of maraging steel C300. End milling experiments are performed at various ...
-
(2023-05)The aim of the experiments is to measure the resistance of commonly used materials like aluminium, copper, and nichrome at both room temperature and cryogenic temperature (77K). To achieve this, an experimental setup ...
-
(2023-05)The Mg & its Alloys are considered to be ‘the green engineering materials of the 21st Century. Mg Alloys are light weight , ease of casting and has superior machinability. It has low density, favorable thermal conductivity ...
-
(2023-05)Green building design is gaining popularity due to the environmental impact of today’s energy sources, which rely heavily on fossil fuels. The construction and industrial facilities sector accounts for up to 40% of ...
-
(2023-05)Nowadays, Liquefied Petroleum Gas (LPG) burners are widely used in households and industries. The conventional LPG burners work on Free Flame Combustion and have lower thermal efficiency, lower turn-down ratio and emit ...